Black Volvo XC40 PPF Installation with ULTRA U75 Film
Project

Black Volvo XC40 PPF Installation with ULTRA U75 Film

A black Volvo XC40 looks striking, but glossy black paint shows every small scratch. Black SUVs often face stone chips on the hood and front end, where paint can chip and scratch during long drives. This exterior paint protection film (PPF) project shows how ULTRA U75 film was applied to a black Volvo XC40 at the ARI workshop, along with the film's specifications, so readers can see what a Volvo XC40 black PPF installation involves.

Black Volvo XC40 PPF Installation with ULTRA U75 Film⛶ 1/10
Vehicle
Volvo · XC40

How Was ULTRA U75 Film Applied to a Black Volvo XC40?

Straight-on view of the front of a black Volvo, with the hood and front bumper covered in clear film while two people work on it, one n

The car is a black-painted Volvo XC40, brought to the ARI workshop for exterior PPF work. The installation photos show the vehicle in the workshop, with its grille, logo, headlight assemblies and a Swedish flag license plate visible at the front, set against a grey tile floor and white marble walls.

ULTRA U75 Film and Technical Specifications

  • Material: TPU
  • Thickness: 8.5 mil
  • Tensile strength: over 30 MPa
  • Maximum heat resistance: 110°C
  • Surface gloss: over 140 GU
  • Coating: Nano Ceramic Ultra
  • Warranty: 8 years

Which Areas of a Black Volvo XC40 Received PPF?

Close-up shot of the front side of a black Volvo, with a worker stretching and applying clear PPF to the lower front fender, near the wheel arch

In the photos of this project, the film was applied to the front end and the front fenders. The hood and front bumper are covered with the clear film, and the lower front fender near the wheel and the adjacent door edge were also covered.

Hood, Front End and Front Fenders

On the hood and front end, the installer stretched and laid the film sheet, smoothing each edge so it sits close to the paint. On the front fender, the film was stretched and applied to the lower panel, an area that is often hit by stones during driving.

What Does the PPF Installation Process Look Like at ARI?

View from the front of a black car, with a technician in black clothing bending down on the left and pulling and stretching a clear PPF film that covers the entire hood and front

The work was carried out in the film workshop. The paint surface was wet with a soap solution so the film could slide and be repositioned. The installer stretched the film by hand, then smoothed it from the centre outward to remove air bubbles and wrinkles. Each area was handled separately so the film covered the surface and followed the car's curves.

Does a Black Volvo XC40 Need Special Care After PPF?

After installation, the film needs time to dry and fully bond to the paint, so it is best to avoid washing the car in the first few days. When cleaning, use clean water and a suitable cleaning product, and avoid harsh scrubbing or hard tools that could scratch the coating.

For more on exterior PPF and how it protects paint, you can review our trusted PPF installation guides, including notes on a Volvo XC40 black PPF installation, or get advice tailored to your specific model.

For a similar project, take a look at our other Toyota Camry red PPF installation completed at the ARI workshop.

Products Used

Frequently asked questions

What PPF film was used on this black Volvo XC40?

This black Volvo XC40 PPF installation used ULTRA U75 film. It is a 8.5 mil TPU film with a Nano Ceramic Ultra coating, and it carries an 8-year warranty according to the film's official specifications.

What is ULTRA U75 PPF film?

ULTRA U75 is a paint protection film made from TPU, with a tensile strength over 30 MPa and a maximum heat resistance of 110°C. Its surface reaches a gloss level over 140 GU, which helps the paint keep its shine while protected.

Does PPF affect the look of a black car?

ULTRA U75 is a clear film, so it does not change the original colour of a black car. Its Nano Ceramic Ultra coating helps the surface keep its gloss, although the final look also depends on the condition of the paint before installation.

Which areas of a Volvo XC40 are usually covered with PPF?

In this project, the film was applied to the hood, front end, front bumper and the lower front fenders near the wheels. These areas are exposed to stone chips during driving, which is why they are often prioritised for protection.

How should you care for a car after PPF installation?

After installation, wait for the film to dry and fully bond before washing the car. When cleaning, use clean water and a suitable product, and avoid heavy scrubbing so the film's coating stays in good condition over time.

Luxury car protected by ARI PPF
Join Our Network

Become an ARI Dealer

Get wholesale pricing, genuine cutting software and factory warranty support. Join the ARI installer network.