Pink paint can show scratches and road debris quickly during daily driving. A clear film like this can help reduce that impact on the paint surface when car PPF cost is planned and applied properly. This case shows the film used, the panels covered, and how the workshop handles the film on a real vehicle.
What film was used on the pink VinFast VF 3?

This installation used TOUCH T65MT, a TPU film with a thickness of 7.5 Mil. The film has a tensile strength above 22 MPa, a maximum heat resistance of 110°C, and a surface gloss above 90 GU. Its top coating is Nano Ceramic.
- Material: TPU
- Thickness: 7.5 Mil
- Tensile strength: above 22 MPa
- Maximum heat resistance: 110°C
- Surface gloss: above 90 GU
- Coating: Nano Ceramic
TOUCH T65MT carries a 3-year warranty. This film line includes several product codes, so the specifications above apply to the TOUCH T65MT line only.
Which panels on the pink VinFast VF 3 were covered?

In the case photos, PPF covers the front end, including the hood and headlight assemblies. The front fenders, the front door, and the side fender are also covered.
The clear film runs continuously from the front end over the front fender to the side of the car. The other angles show the body after completion, and no other parts are shown as covered beyond these areas.
How does the ARI workshop apply PPF film?

The technician stretches the clear film over the hood and headlights, then applies it to the paint surface. On the front fender, the technician peels the film back from the edge to align it before pressing it down.
On the left side, the technician uses hands to smooth the film edge covering the front door and fender. The whole process takes place inside a workshop bay with overhead lighting on the vehicle surface.
How should you care for a car after PPF installation?
After a VinFast VF 3 pink PPF installation, keep the film surface clean to help maintain its clarity and gloss. Wash the car gently and avoid rubbing the film surface hard.
When cleaning, use a pH-neutral car wash solution and a soft cloth. Avoid harsh chemicals that may affect the Nano Ceramic coating on the film.
If you are looking at another project of the same type, the ARI workshop has also completed a Land Rover Defender PPF installation in blue.


