Land Rover Defender PPF Installation: ULTRA U100 Case Study
Project

Land Rover Defender PPF Installation: ULTRA U100 Case Study

A green Land Rover Defender has been fitted with paint protection film (PPF) directly over its original paint at the ARI workshop. This Land Rover Defender PPF installation uses ULTRA U100 film on the areas most exposed to impacts at the front and on the rear tailgate. Photos taken during the job show each step of the process.

Land Rover Defender PPF Installation: ULTRA U100 Case Study⛶ 1/10
Vehicle
Land Rover · Defender

Off-road vehicles like the Defender often face gravel, road dust and light scratches at the front end, where impacts are most frequent. A protective film helps the paint underneath withstand these knocks better.

Which ULTRA U100 film was chosen for the green Defender?

Front-end close-up; two people in black polo shirts are pulling and stretching a clear PPF film over the Land Rover hood

This job used ULTRA U100 film with a 10-year warranty. The film is made from TPU, with a thickness of 8.5 Mil or 10 Mil depending on the product code, a tensile strength above 35 MPa and a maximum heat resistance of 110°C. The surface gloss exceeds 140 GU, and the film is coated with Nano Ceramic Ultra.

The ULTRA U100 range includes several product codes with different specifications, so the general figures above are for reference only. The exact code used on this vehicle should be checked against the workshop's installation record.

Which areas of the Defender received PPF?

Front-on shot of a blue Land Rover Defender front end covered with clear PPF film, with two hands smoothing and stretching the film

Hood and front bumper

The hood was covered with clear film just in front of the windscreen. Two technicians pulled and stretched the film across the entire hood panel. At the front end, the film continued onto the front bumper, with the installers smoothing it on both sides so it sat close to the surface.

DEFENDER lettering on the tailgate

The rear tailgate with the "DEFENDER" lettering was covered with clear film. During installation, the surface was misted with water so the film could be lifted and positioned more precisely before it bonded to the paint.

How the film was stretched and applied to the body

Rear close-up of an olive green Land Rover Defender, with one person peeling the clear film off the "DEFENDER" lettering on the tailgate

ARI carried out the work in a space with ARI film columns and a tiled floor. Before application, the paint surface was cleaned. The film was placed over the target area, then the technician gently stretched and smoothed it so it followed the curves of the front end.

On areas with many ridges, the installer typically works in small sections to reduce wrinkles and air bubbles. This step calls for both skill and care on every detail. During the PPF for cars process on this green Land Rover Defender, the technician also rechecked the film edges after each step to make sure they bonded evenly.

How should you care for a Defender after PPF installation?

After PPF installation, avoid aiming a high-pressure washer too close to the film edges during the first few days. Wash the vehicle with clean water and a dedicated cleaning solution, then dry gently with a soft cloth to keep the surface clean and even.

  • Wash the vehicle regularly with a pH-neutral cleaner and avoid harsh chemicals.
  • Do not scrape, rub hard or use sharp objects on the film surface.
  • Check the film edges regularly to catch any early signs of lifting.

Proper care helps the film last longer and keeps its original gloss for longer.

This exterior PPF installation on a green Land Rover Defender used ULTRA U100 film, focusing on the hood, front bumper and tailgate. If you are considering a Land Rover Defender PPF installation for your own vehicle, contact ARI for advice on the right option.

If you are interested in this kind of work, you can also see another PPF job the ARI workshop completed, a VinFast VF 6 grey PPF installation.

Products Used

Frequently asked questions

What type of PPF was applied to the green Land Rover Defender?

The green Land Rover Defender in this job was fitted with ULTRA U100 film. The film comes with a 10-year warranty and is made from TPU, with a thickness of 8.5 Mil or 10 Mil depending on the code, and a Nano Ceramic Ultra coating.

Which areas of this Defender received PPF?

This job applied PPF to the hood, the front bumper and the rear tailgate with the "DEFENDER" lettering. The film covers the hood up to the windscreen and wraps closely around both sides of the front bumper.

Does PPF change the green color of the vehicle?

ULTRA U100 is a clear film applied directly over the original paint, so the vehicle keeps its green olive color. A surface gloss above 140 GU helps the paint look bright and even.

What are the specifications and warranty of ULTRA U100 film?

ULTRA U100 comes with a 10-year warranty and is made from TPU, with a tensile strength above 35 MPa and a maximum heat resistance of 110°C. Thickness is 8.5 Mil or 10 Mil depending on the product code, and the Nano Ceramic Ultra coating makes the surface easier to clean.

How should you care for a Defender after PPF installation?

Wash the vehicle with clean water and a pH-neutral cleaner, and avoid aiming a high-pressure washer directly at the film edges. Do not use sharp objects or harsh chemicals, and check the edges regularly for early signs of lifting.

Luxury car protected by ARI PPF
Join Our Network

Become an ARI Dealer

Get wholesale pricing, genuine cutting software and factory warranty support. Join the ARI installer network.