Clear film keeps the original blue finish visible while adding a sacrificial layer over the paint. The work was carried out at the ARI workshop using ULTRA U65 film on the front end, sides and rear of the car, making it a practical example of car paint protection film applied to a popular family SUV.
Which film was used on this blue Forester?

The Subaru Forester blue PPF installation used ULTRA U65, a TPU film with a thickness of 8.5 mil. It offers a tensile strength above 30 MPa, a maximum heat resistance of 110°C, a surface gloss above 100 GU, and a Nano Ceramic Ultra topcoat. The film carries a 6-year warranty.
Which exterior panels received PPF?

On this Forester, the front end was covered, including the bonnet and headlights. The sides, including the front doors and front wheel arches, were protected against daily stone chips and light scratches. The rear section, covering the rear bumper and rear door edges, completed the job.
How does the ARI workshop apply the film?

Technicians lay the wet film sheet over each surface, then stretch and smooth it so it bonds closely to the bodywork. The panels are worked in order from the front end to the sides and then the rear, so the film sits continuously across each section.
How should you care for a Forester after PPF installation?
After the film is applied, allow it to settle before the first wash and avoid rubbing the surface firmly. Wash the car with clean water and a soft cloth, and limit the use of harsh chemicals. Proper care helps the film retain its gloss and continue protecting the paint for longer.
For another example of our craft, explore the Hyundai Stargazer white PPF installation completed by the ARI workshop team.


