The cabin is where drivers and passengers touch the car most often. The armrest, dashboard, central screen and instrument cluster can scratch and collect dust over time. Skoda Octavia interior PPF protects these surfaces with a clear film that leaves the original interior colour unchanged.
This project record covers a car interior PPF installation on a Skoda Octavia at ARI, including the film used, the areas covered and the care steps after installation.
What Is the TOUCH T65 Film Used on This Skoda Octavia?

This job used TOUCH T65, an interior PPF film with the following key specifications:
- Material: TPU
- Thickness: 8 Mil
- Tensile strength: above 25 MPa
- Maximum heat resistance: 110°C
- Surface gloss: above 94 GU
- Coating: Nano Ceramic
- Warranty: 5 years
The Nano Ceramic coating helps the film keep its gloss and makes dust easier to wipe away. The TPU material helps the film stay flexible when the surface is exposed to heat or light impacts.
Which Interior Areas Were Covered With PPF in This Job?

The film in this job was applied in the cabin and the door trim area, covering the centre armrest, dashboard, central display and instrument cluster.
Armrest and Centre Tray
The film was peeled and positioned on the centre armrest tray, beside the gear selector. This is where the driver and passenger rest their arms most often while driving.
Dashboard and Central Display
A clear film sheet was placed over the central display and the dashboard area beside it. This helps limit dust and scratches when cleaning the screen or using its controls.
Instrument Cluster and Door Trim Edge
The film was applied over the odometer section of the instrument cluster on the dashboard. On the door side, the film was aligned along the edge of the black door trim panel.
How Does ARI Peel, Align and Apply the Film?

The process starts with peeling the film from its liner and cutting it to the shape of each part. On curved surfaces and trim edges, the installer peels and aligns the film section by section by hand before fixing it in place.
For the screen and dashboard, the film is held with both hands, placed wet onto the surface and adjusted before being pressed flat. This helps the film adhere evenly and avoids leaving air bubbles on the surface.
What Care Does Interior PPF Need After Installation?
After interior PPF is applied, the film needs time to dry completely. During this period, avoid heavy contact or rubbing the freshly applied areas with hard objects.
For routine cleaning, use a soft cloth and a pH-neutral cleaner to wipe the film gently, and avoid corrosive chemicals. Keeping the film clean helps the Nano Ceramic coating perform better over time.
For another job of the same kind, browse the GLC 300 interior PPF installation we completed at our ARI workshop.


